OECDReference EN/AE/21044
EXTENSION CORD
Official information organised for easier consultation. The source publication remains authoritative.
Identification
Product identification
- Product
- EXTENSION CORD
- Category
- Electrical Appliances
- Model
- TPB626AB
Official information
Risk and measures
- Risk or hazard
- 10.5 Failing in shuttered socket-outlets shall, in addition, be so constructed that live parts are not accessible without a plug in engagement, with the gauges shown in figures 9 and 10 and for socket-outlets with a plug completely withdrawn by applying the above gauges as follows. The gauge according to figure 9 is applied to the entry holes corresponding to the live contacts with a force of 20 N. The gauge is applied to the shutters in the most unfavorable position, successively in three directions, to the same place for approximately 5 s in each of the three directions. During each application the gauge shall not be rotated and it shall be applied in such a way that the 20 N force is maintained. When moving the gauge from one direction to the next, no force is applied but the gauge shall not be withdrawn. 20 Failing in breaking capacity. 21 Failing in normal operation.
- Measure or action
- Consultar la ficha oficial OECD
Territory
Geography
- Distribution
- Retirada en United Arab Emirates
- Country of recall
- United Arab Emirates
Provenance and context
NagameAlert distinguishes content published by the source from its organisation and normalisation. Values marked “NagameAlert” belong to that processing layer. Always check measures, scope and updates in the official publication.